• Designed for one or two .5 gallon (1.89 litre) coffee brewers. They also work well with BUNN HW2 hot water dispenser.
• Provides 1,500 gallons (5,678.12 litres) of superior sediment, taste/odor and chlorine reduction @ .5 gpm (1.89 Lpm).
• 5 micron graded density filtration for long life.
• Perfectly sized to ensure quality coffee and long-term performance of 1 to 5 pot brewers. Up to 15 lbs. (6.8 kg) of coffee per week.
• Special scale inhibitor provides six months of scale reduction and guards against corrosion.

• Quick change filter head allows cartridge replacements in only a few seconds, and in any position.

• The ED-17-TL replaces the 750 In-Line filter previously offered by BUNN.

• Provides 4,800 gallons (18,169.98 litres)@ 1.5 gpm (5.68 lpm) (EQ-11) or 12,600 gallons (47,696.19 litres) @ 1.67 gpm (6.32 lpm) (EQ-12) for superior sediment, taste/odor and chlorine reduction.
• Can be mounted in any position; has quick change filter head for easy cartridge replacement.
• Auto shut-off.
• 5 micron graded density filtration for EQ-11 and 1 micron graded density filtration for EQ-12.
• Perfect for beverage systems with a medium sized brewer. Up to 50 lbs. (22.7 kg) of coffee per week.
• Provides six months of scale reduction and protects equipment from corrosion.
• Designed for minimum purge after cartridge charge.
• Single purpose cartridges also available for treatment of problems with taste and odor (T), lime scale (L), hardness (H) and sediment filtration (S).

• Provides 4,500 gallons (17,034.35 litres) @ .75 gpm (2.84 lpm) (ED-11) or 9,000 gallons (34.068.71 litres) @ 1.5 gpm (5.68 lpm) (ED-12) for superior sediment, taste/odor and chlorine reduction.
• Perfect for beverage systems with a medium sized brewer. Up to 50 lbs. (22.68 kg.) of coffee per week.
• Effective 10 micron graded density filtration.
• Provides six months of scale reduction and protects equipment from corrosion.
• Has easy water shut-off valve built into manifold, plus the clear housing makes it easy to see cartridges.
• Designed for minimum purge after cartridge charge.
• Single purpose cartridges also available for treatment of problems with taste and odor (T), lime scale (L), hardness (H) and sediment filtration (S).
• System Tested and Certified by NSF International against ANSI/NSF Standard 42 for the reduction of sediment, taste/odor, and chlorine.

ED-12-HB
Easy Clear® Drop-In (ED) Tea Water Softening System

• Perfect for iced or hot tea brewers where hard water can affect tea clarity and taste.
• Provides 4,500 grains per gallon (gpg) of filtering for proper tea water softening.
• Blends softened and regular water for optimum tea flavor and clarity.
• Increases tea stand time.
• Economical to operate, provides 25 percent more water treatment than standard systems.
• Minimizes service maintenance and equipment downtime with reduced
  scale forming minerals.
• Easy professional installation.
• Simple-to-install replacement cartridge - ED-HB-2.

EDDSS-11-T200F
Easy Clear® Drop-In (ED)
Hot or Cold Water Quality System

• Designed for BUNN liquid coffee machines supplied with hot water.
• Provides 2,500 gallons of superior sediment, taste/odor and chlorine reduction @ 2 gpm.
• 5 micron graded density filtration for long life.
• Perfectly sized to ensure quality coffee and long-term performance.
• Stainless steel housings assure reliable performance in high temperature or pressure applications.
• In-line units have 316 stainless steel heads with 304 stainless steel housings, rated to 300 psi (2,069 kPa) for durability.
• Hot and cold water applications*
• Rigid construction of the stainless steel housing provides durability and withstands extreme water hammer.

EQ-12-TH
Easy Clear® Quick Connect (EQ) System

• Water Quality System
• Designed for use in the BUNN Espress Café machine. Also can be used with BUNN brewers.
• Provides 422 gal. (1,597.44 litres) of superior sediment, taste/odor, sediment and chlorine reduction @ .5 gpm.
• 5 micron graded density filtration for long life.
• ScaleGard® Pro scale inhibitor provides six months of scale reduction and guards against corrosion.

EQHP-10L or EQHP-10
Easy Clear® High Performance 10,000 Gallon Water Quality System

• Consistent great-tasting brewed coffee and tea from water with reduced sediment and chlorine taste and odor.
• Equipment protection from reduced sediment particles that can clog the sprayhead.
• Reduced scale formation by the controlled release of proprietary scale inhibitors with “L” model.
• System includes a head assembly, integral mounting bracket, and single cartridge filter.
• Quick Connect valve-in-head design simultaneously shuts off and vents water with 1/4 turn, allowing for simple and trouble-free cartridge change-outs.
• Filter cartridges incorporate carbon block media and require no pre-activation.
• Optional pressure gauge allows monitoring of downstream water pressure.
• NSF Standard 42 and/or FDA CFR-21 compliance provides assurance of safety.
• 3/8”FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections to existing plumbing lines.
• System maximum operating pressure is 125 psi (862 kPa) and operating temperature 100˚F (38˚C).

EQHP-25L or EQHP-25
Easy Clear® High Performance 25,000 Gallon Water Quality System

• Consistent great-tasting brewed coffee and tea from water with reduced sediment and chlorine taste and odor.
• Incorporates multi-zone pharmacutical grade pleated nylon pre-filter.
• Pre-filter offers exceptional sediment holding capacity and particle reduction to 0.2 microns.
• Equipment protection from reduced sediment particles that can clog the sprayhead.
• NSF Standard 42 and/or FDA CFR-21 compliance provides assurance of safety.
• Certified by NSF to Standard 53 for cyst reduction.
• Reduced scale formation by the controlled release of proprietary scale inhibitors with “L” model.
• System includes a head assembly, integral mounting bracket, and single cartridge filter.
• Quick Connect valve-in-head design simultaneously shuts off and vents water with 1/4 turn, allowing for simple and trouble-free cartridge change-outs.
• Optional pressure gauge allows monitoring of downstream water pressure.
• Filter cartridges incorporate carbon block media and require no pre-activiation
• 3/8” FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections to existing plumbing lines.
• System maximum operating pressure is 100 psi (862 kPa) and operating temperature 100˚F (38˚C).

EQHP-54L or EQHP-54
Easy Clear® High Performance 54,000 Gallon Water Quality System

• Consistent great-tasting brewed coffee and tea from water with reduced sediment and chlorine taste and odor.
• Incorporates multi-zone pharmacutical grade pleated nylon pre-filter.
• Pre-filter offers exceptional sediment holding capacity and particle reduction to 0.2 microns.
• Equipment protection from reduced sediment particles that can clog the sprayhead.
• Reduced scale formation by the controlled release of proprietary scale inhibitors with “L” model.
• System includes a head assembly, integral mounting bracket, and single cartridge filter.
• Quick Connect valve-in-head design simultaneously shuts off and vents water with 1/4 turn, allowing for simple and trouble-free cartridge change-outs.
• Optional pressure gauge allows monitoring of downstream water pressure.
• Filter cartridges incorporate carbon block media and require no pre-activiation.
• NSF Standard 42 and/or FDA CFR-21 compliance provides assurance of safety.
• Certified by NSF to Standard 53 for cyst reduction.
• 3/8”FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections to existing plumbing lines.
• System maximum operating pressure is 100 psi (862 kPa) and operating temperature 100˚F (38˚C).

EQHP-ESP
Easy Clear® High Performance Espresso Water Quality System

• Specialized blend of resin targeted to reduce hardness and alkalinity. Designed specifically for espresso applications.
• Provides 422 gallons of hardness reduction @ 10.5 GPG (grains per gallon) with a service flow rate of .5 gpm.
• Carbon block integrated to reduce taste and odor.
• Quick Connect valve-in-head design simultaneously shuts off and vents water with 1/4 turn, allowing for simple and trouble-free cartridge change-outs.
• 3/8” FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections to existing plumbing lines.
• System maximum operating pressure is 125 psi (862 kPa) and operating temperature 100˚F (38˚C).

EQHP-SFTN
Easy Clear® High Performance Water Softening Quality System

• Perfect for low volume iced or hot tea brewers where hard water can affect tea clarity and taste.
• Increases tea stand time.
• Provides 1,350 grains of hardness reduction.
• Minimizes service maintenance and equipment downtime with reduced scale forming minerals.
• System includes a head assembly, integral mounting bracket and single cartridge filter.
• Quick Connect valve-in design simultaneously shuts off and vents water with 1/4 turn, allowing for siimple and trouble-free cartridge change-outs.
• Integrated carbon block media to reduce taste and odor.
• 3/8” FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections to existing plumbing lines.
• System maximum operating pressure is 125 psi (862 kPa) and operating temperature 100˚F (38”C).
• Automatic pressure relief valve makes cartridge changeout easy.

EQHP-Tea
Easy Clear® High Performance Water Quality System for Tea

• Perfect for iced or hot tea brewers where hard water can affect tea clarity and taste.
• Increases tea stand time.
• Provides 4,350 grains of hardness reduction.
• Minimizes service maintenance and equipment downtime with reduced scale forming minerals.
• System includes a head assembly, integral mounting bracket and single cartridge filter.
• Quick Connect valve-in design simultaneously shuts off and vents water with 1/4 turn, allowing for siimple and trouble-free cartridge change-outs.
• Integrated carbon block media to reduce taste and odor.
• 3/8” FNPT horizontal inlet and outlet ports allow direct or easily adaptable connections to existing plumbing lines.
• System maximum operating pressure is 100 psi (862 kPa) and operating temperature 100˚F (38˚C).

Scale-Pro
Easy Clear® Scale-Pro™ Water Quality System

• Reduces lime scale formation from hard water in applications where water is either heated or evaporated.
• System extends the life and increases the efficiency of coffee brewers, espresso machines and steamers.
• Engineered force feeding orifice accurately controls feed rate without overdosing.
• Proprietary scale inhibitor does not break down at temperatures above 200˚F (93.3˚C).
• 3/4” NPT stainless steel connections easily adapt to most plumbing systems. (Kit 39000.0101 available with bushings to reduce to 3/8” and 1/4” NPT).
• Working flow rate of 6 gpm (22 lpm) accommodates most high temperature foodservice equipment.
• FDA-CFR and NSF compliant materials.
• Recommended for use in combination with an EQHP10, 25, 54 (non-L) system.
• System maximum operating pressure is 125 psi (862 kP) and operating temperature 100˚F (38˚C).
• Suggested cartridge change-out is every 6 months.